Move over Boxee Box, here comes PopBox!

Last updated Jan 4, 2010 — 43098 views

Following closely on the heels of the December announcement of D-Link’s Boxee Box, Syabas Technology today said it will ship a $129 Internet-based A/V streaming set-top box (STB) in March. Both new gadgets have the potential to give Roku’s popular Netflix-streaming STB a run for its money.

All three boxes can deliver range of Internet-based A/V streaming and social networking services to consumer’s TVs. Like Roku’s digital video player STB, the PopBox will include Netflix on-demand video streaming when it first ships. D-Link, meanwhile, is rumored to be scrambling to add Netflix streaming support to its Boxee Box device as well, prior to inaugural shipments of that device. All three run embedded Linux OSes, and all are expected to sell for less than $200.


Syabas’s PopBox has a simple, boxy look
(click image to enlarge)

Syabas says it will demo a PopBox prototype running the 20 apps listed below this week at CES in Las Vegas, with additional apps expected to be on the box when it ships in March.

Initial PopBox Built-in Apps
  • Netflix
  • Revision3
  • Funspot Games
  • Photobucket
  • Next New Networks
  • Livestation
  • Pico Channel
  • Thinking Screen Media
  • Mediafly
  • Weather Bug
  • Twitter
  • Facebook
  • IMDB
  • SHOUTcast
  • Crunchy Roll
  • Blip TV
  • Waterfront Entertainment
  • Channels.Com
  • FrameChannel
  • Internet Video Archive


According to Syabas COO Alex Limberis, the PopBox is a spinoff of the company’s pioneering Popcorn Hour STB (pictured at right).

Relative to the Popcorn Hour, the PopBox has a substantially redesigned UI (user interface), a more finished-looking case, 2GB of internal nonvolatile storage (flash), and a new, extensible application platform through which third-party-developed apps can be downloaded directly into the device. On the other hand, the PopcornHour’s media-server functions have been omitted, resulting in a simpler, less expensive device.

Limberis says the PopBox’s configuration requirements and redesigned UI are intended to implement a consumer-friendly device that’s “easy enough for my mom to setup and use.” In this regard, the company appears to have taken a cue from Roku’s highly popular Netflix-streaming STB (shown at right).

Notably absent from the 20 apps listed above is YouTube. As Limberis explains on his blog, YouTube asked Syabas to remove YouTube video streaming capability from the Popcorn Hour STBs based on a “terms of use” restriction pertaining to the use of YouTube’s video-streaming APIs (application programming interfaces) by commercial STBs. (Read Limberis’s blog post for more details.)

PopBox Screenshots

Here are some screenshots showcasing the PopBox’s UI:

(click each image to enlarge)

(click each image to enlarge)

 
What’s inside the box?

According to Limberis, the PopBox is based on essentially the same hardware design as its Popcorn Hour predecessor, except without the option of a user-added internal hard drive or of the ability to provide media streaming server functions (dubbed “networked media tank” capabilities) on the home LAN.



PopBox front view, rear view, and remote control
(click remote control image to enlarge)

Specifically, the PopBox will run a customized Linux 2.6 kernel-based OS on a Sigma Designs SMP8643 system-on-chip (SoC) processor. The SMP8643 SoC integrates a 667MHz MIPS application processor (on which the Linux OS runs), a 2D graphics processor, a trio of 333MHz audio DSPs (digital signal processors), and a dedicated 333MHz security processor (MIPS 4KEc IPU). The chip’s hi-definition A/V outputs support MPEG-4.10 (H.264), SMPTE 421M (VC-1), AVS, WMV9, MPEG-4.2, and MPEG-2 media formats.

The SMP8643’s on-chip security processor provides robust digital rights management and “conditional access” content protection, which apparently satisfy Netflix’s requirements for the streaming of its on-demand video titles. Further details regarding the innards of the PopBox’s SMP8643 processor can be spotted on this detailed block diagram.
 
Summary of hardware specs

All told, the PopBox’s key hardware specs will include the following:

  • Sigma Designs SMP8643 system-on-chip processor:
    • 667MHz MIPS application processor
    • 333MHz security processor
    • 3x 333MHz audio DSPs
  • Memory:
    • 512MB DDR2 SDRAM
    • SD Card slot equipped with a 2GB card
  • Audio/Video outputs:
    • HDMI v1.3a (up to 1080p)
    • Component video (up to 1080p)
    • Stereo analog audio
    • S/PDIF optical digital audio
  • Interfaces:
    • 10/100 Ethernet interface
    • 2x USB 2.0 ports
  • Remote control technology: IR
  • Power consumption: < 15W
  • Enclosure:
    • Size: 8 x 6 x 1.25 inches
    • Fanless

Supported multimedia formats and standards

Syabas claims the device will support the following codecs, DRM, metadata, and media access standards:

  • Video: MPEG1/2/4, Open MPEG-4 HD, Xvid-HD and WMV9-HD, VC-1,H.264
  • Audio: MP1/2/3, WMA, WMA Pro, OggVorbis, AAC, AC3, DTS, PCM, WAV and FLAC
  • Container: ASF, ISO, IFO, MPEG-TS, MPEG-4, MOV, MKV, AVI, WM-DRM, VOB, MP4, RMP4
  • Photos: JPEG, animated GIF89a, BMP and PNG
  • Subtitles: MicroDVD (*.sub), SubRip (*.srt), Sub Station Alpha (*.ssa), Microsoft’s Synchronized Accessible Media Interchange -SAMI (*.smi)
  • Streaming standards: SMB, Bonjour, UPnP, DLNA, WM-DRM, etc.

The bottom line

All in all, if Syabas successfully delivers on its promise of a truly easy-to-use UI, the $129 PopBox could become a highly popular family room gadget during 2010. In particular, the device’s support for a wide range of third-party-developed applications could be a significant selling point vs. the more restricted set of user-selectable apps on Roku’s similarly-priced STBs.

Limberis says the PopBox will become available for $129 in March from “etailers” such as Amazon and direct from the PopBox website. Additionally, Syabas is in discussion with undisclosed brick-and-mortar retailers in the North American market, he adds.
 
 
Related stories:

 
 



10 responses to “Move over Boxee Box, here comes PopBox!”

  1. Carson Chittom says:

    I don’t see a wireless adapter in the specs—and with our house soon to have three children under 5, having a wire running to basically anything is a no-go. In all other respects this thing looks very cool (assuming the $129 price point ends up being accurate).

  2. Nate says:

    With past units (Popcornhour A-100 & A-110) there is a USB wireless dongle available for purchase with the unit. Although it is recommended for high definition video to use wired connection. You can run into more problems using wireless for HD depending on the quality of the wireless signal to the unit.

  3. xVEGGIEx says:

    I don’t see anything about Hulu support either.

  4. Chris says:

    If you don’t want any wires running to the box, how are you going to power it?

  5. Doc says:

    I think I’ll stick to the Myka ION

  6. Mike says:

    Even if you solve the power-without-wires issue, the box will have a hard time outputting video unless you use a wire to plug it into the TV.

  7. Ganesh says:

    I have a feeling they wont go with SMP 8643 because they have no intention of adding Blu-Ray drive support to this.

    There is no need for DRM, so why go with the costlier 8643 when they may do well enough with the SMP 8655, which is the same as in the WDTV Live?

  8. Anonymous says:

    @Ganesh: they need MS DRM for Netflix video-on-demand streaming

  9. Sam says:

    The shipping day was announced – July 24th but no Netflix, so you might want to adjust the pictures. See more at http:\reviewhorizon.com

  10. DeviceGuru says:

    @Sam: thanks for pointing that out. Further details are on the PopBox blog, here, and will be published in a DeviceGuru article shortly.

    Quoting from the PopBox blog article: “We have arrived at a definitive ship date for the PopBox. The Good News — it’s just a few weeks from today. The Bad News — it’s a few weeks from today. We had been working feverishly to make the July 4th weekend — but although the firmware is good to go the software as of today just wasn’t quite where we wanted it to be, so we made the call to delay getting the boxes shipped out from Amazon’s warehouses until July 23rd.”